|
|
Build Your Online Product Catalogs?
| Product Name: |
Addition silicone for lifecasting design
|
| Supply Ability: |
|
| Related proudcts |
lifecasting silicone, |
| Specifications |
Lifecasting silicone rubber is easy to use and cures quickly.It |
| Price Term: |
fob |
| Port of loading: |
shenzhen |
| Minimum Order |
200kg |
| Unit Price: |
10-18usd/kg |
|
Description:
This silicone is also suited for use with confectionery, speciality foods and is safe for contact with skin for life castings. ***ailed reproduction of figures, art objects and similar items. Suitable for use with polyurethane resins, polyester resin, acrylic resin, plaster, cement and waxes..
Pot life of 20-40 mins with a cure time of 6-8 hours at 25°C.
If both components are pre-heated to 30°C before mixing the mixture will have a pot life of 10-15 mins with a cure time of 1-2 hours.The two components mix easily by hand with a 1:1 ratio and because of the low viscosity can be used without processing in a vacuum chamber.
Colorï¼?transulant
Mix ratio:1:1
Hardness:5-40
Certifications: SGS,MSDS,RoHS,FDA
EINECS No: 39100000
Transportation: By sea or by air
Technical support: free
There is the steps how to make a life casting share to you.
1.Make a silicone mould
Firstly,you should choose an original mould,could be your own body ,finger,or the mould your customer need ,it’s just depend on you.Then take some Lifecasting silicone rubber(the weight is depend the size of your original mould )with Platinum catalyst(Nontoxic),and stiring them evenly.
After, could use a brush to brush the silicone to original mould evenly,about the thickness , 2-5 mm is OK.10 minuite later could demould.
2.Use the silicone mould to produce your products.
After finish the silicone mould, brush some release agent on silicone mould. Take silicone rubber (with skin color) ,and add Platinum catalyst ,then stiring evenly. Pouring it to the silicone mould ,20 minutes later,could demould and have finish your perfect product.
If your want make a scary clown or Haunted House contents,then could paint the color you want.
It’s so easy, yes?
For the addition platinum cured silicone rubber ,have many good features as below:
odourless and non toxic.
Long mould life
virtually no shrinkage
high tear resistance
high dimensional stability over time
non-deformability and excellent reproduction of fine |
| Company: |
Shenzhen Hong Ye Jie Techonology Co;LTD
|
| Contact: |
Mr. Dirk Young |
| Address: |
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Longgang, Shenzhen, Guangdong |
| Postcode: |
518117 |
| Tel: |
86075589212365 |
| Fax: |
86075589948030 |
| E-mail: |
|
|
|
|
Home
